PROPAM® FLOOR 100

Standard low viscosity epoxy primer.

Description

Additional information

Documents

Two-component epoxy coating, transparent or colored, solvent-free and filler-free, with low viscosity and high penetration. Complies with the requirements of the UNE EN 13813 standard.

Fields of application

  • Primer, regularization mortar or intermediate layers, for indoor use, with high adhesion on concrete, mortar, stone, cement render and fiber cement supports, prior to the application of synthetic, epoxy or polyurethane systems, for industrial and decorative floors.

  • Diluted can act as a consolidator of cementitious supports.

  • Not suitable for sealing
propiedades

  • Great moisturizing power.

  • Low viscosity, high penetration.

  • Excellent adhesion to the support.

  • Solvent-free.

  • Possibility of high thicknesses.
consumo

As a primer, apply by roller at 0.25–0.300 kg/m².
When applied with a rubber or metal trowel, consumption is 0.45–0.80 kg/m² and it should be broadcast to refusal with quartz.
As a levelling mortar, it can be mixed with different quartz sizes and dosages depending on the system to be used. Consumption will vary from 0.80 to 1.00 kg/m².
The stated rates are approximate and will depend on the condition and absorption of the substrate.
For other application systems, please contact the Technical Department.
Share this product
Share this product
[hubspot portal="24924442" id="2681214c-3055-4f2d-bf50-dd9948f6cc3c" type="form"]