PROPAM® SEAL AC40 F

Description

Additional information

Documents

One-component, water-based, fire-resistant acrylic sealant that forms an elastic rubber upon evaporation of the water phase and exhibits excellent adhesion to all types of porous substrates used in construction. It is paintable and odorless. Complies with EN 15651 F-EXT-INT

Fields of application	Sealing of joints and cracks with minimal movement, firewalls, and slabs. Sealing of ventilation and air conditioning ducts. Sealing of low-movement joints in general. Sealing of pipes, cable penetrations, etc. Sealing of joints where fire resistance is required.
propiedades	It adheres very well to: glass, galvanized steel, stainless steel, brass, copper, ceramic, polyester, fiberglass, polycarbonate, ABS, polystyrene, rigid PVC, brick, concrete, mortar, limestone, granite, anodized aluminum, polished aluminum, wood, etc…. It is recommended to perform adhesion tests on any material unknown to the user. It does not emit unpleasant odors. It does not contain isocyanates It does not cause corrosion in metals. Easy to extrude, it does not offer much resistance in applicator guns. It remains flexible at low (-20ºC) and high temperatures (+80ºC). There is no contraction of the cord once it has healed. Paintable once cured. CE marking: EN 15651-1 F-EXT-INT A+ certified, product with very low emissions of volatile organic compounds according to ISO 16000 Fire behavior, classification B-s1,d0 according to EN-13501-1 Fire resistance (RF/EI) up to 4 hours according to UNE EN-1366-4 and classification according to UNE EN-13501-2. Report: 23-32306884 (Applus+)
consumo	For a joint 5 mm wide x 5 mm deep, with a single sausage containing 600 ml we could seal over 24 linear meters of joint.

Fields of application

Sealing of joints and cracks with minimal movement, firewalls, and slabs.

Sealing of ventilation and air conditioning ducts.

Sealing of low-movement joints in general.

Sealing of pipes, cable penetrations, etc.

Sealing of joints where fire resistance is required.

propiedades

It adheres very well to: glass, galvanized steel, stainless steel, brass, copper, ceramic, polyester, fiberglass, polycarbonate, ABS, polystyrene, rigid PVC, brick, concrete, mortar, limestone, granite, anodized aluminum, polished aluminum, wood, etc….

It is recommended to perform adhesion tests on any material unknown to the user.

It does not emit unpleasant odors.

It does not contain isocyanates

It does not cause corrosion in metals.

Easy to extrude, it does not offer much resistance in applicator guns.

It remains flexible at low (-20ºC) and high temperatures (+80ºC).

There is no contraction of the cord once it has healed.

Paintable once cured.

CE marking: EN 15651-1 F-EXT-INT

A+ certified, product with very low emissions of volatile organic compounds according to ISO 16000

Fire behavior, classification B-s1,d0 according to EN-13501-1

Fire resistance (RF/EI) up to 4 hours according to UNE EN-1366-4 and classification according to UNE EN-13501-2. Report: 23-32306884 (Applus+)

consumo

For a joint 5 mm wide x 5 mm deep, with a single sausage containing 600 ml we could seal over 24 linear meters of joint.

PROPAM® SEAL AC40 F

Description

Additional information

Related products

PROPAM GROUT 180 HP

PROPAM® REPAR 910 R

PROPAM GROUT 140 R

PROPAM® TECH PRONTO