PROPAM® REPAR TECHNO 40

PROPAM® REPAR TECHNO 40 is a high-adhesion, non-shrink, sulfate-resistant, thixotropic repair mortar with high mechanical strength. It is designed for the structural repair of concrete in aggressive environments (XA), reinforced with fibers, and specially formulated to prolong the protection of the reinforcement against corrosion by inhibiting oxidation. It meets the requirements of EN 1504-3 class R4, EN 1504-2, and EN 1504-7. It bears CE Marking 2+ for use in building construction and civil engineering works of all types.

PROPAM® REPAR TECHNO 40

Description

Additional information

Documents
Susterra
Fields of application

  • Restoring the concrete to its originally specified shape and function by means of mortar applied manually or by projection (Principle 3 CR, method 3.1 and 3.3 acc. to EN 1504-9).

  • Structural reinforcement by increasing the bearing capacity of the concrete structures by adding mortar (Principle 4 SS, method 4.4 of EN 1504-9).

  • Restoring the passivation by increasing the coating with cement mortar and replacing the contaminated or carbonated concrete (Principle 7 RP, methods 7.1 and 7.2 acc. to EN 1504-9).

  • Humidity control by protection (Principle 2 MC, method 2.3 acc. to EN 1504-9).

  • Increase in resistivity through impregnation (Principle 8 IR, method 8.2 acc. to EN 1504-9).

  • Control of the anodic areas by coating the rebar with a barrier coating (Principle 11 CA, method 11.2 acc. to EN 1504-9).

  • Structural repair of all kinds of elements subject to aggressive environments such as:

  • - Columns, beams, joists, wrought iron edges and slabs, made with anti-sulphate cements.

  • - Chimneys, cooling towers or bays, etc.

  • - Decanters, digesters, purifying plants, etc.

  • - Tunnels and buried structures in aggressive environments.

  • - Structures in saline environments or in contact with sea water.

  • - Rehabilitating building structures.
propiedades

  • It allows implementing the structural repair with just one product and in one step.

  • Sulphate resistant.

  • High thixotropy, applicable in thicknesses of 2 to 80 mm, manually or by projection.

  • High mechanical strength.

  • No shrinkage and reinforced with fibres, it does not crack.

  • Its accurate granulometry provides a cosmetic finish similar to that of the original concrete.

  • Free of chlorides, its high pH protects against the corrosion of metal elements, such as rebars, anchorings, etc.

  • Excellent adhesion strength to concrete, even on substrates that are not very porous.

  • Impermeable.

  • Applicable indoors and outdoors.

  • High resistance to carbonation and the freezing-thawing cycles.

  • Can be applied by projection.

  • It withstands temperatures between -50 ºC and +500 ºC.

  • Excellent workability.

  • Protects the armor from corrosion by inhibiting its oxidation.
consumo

18 Kg / m2 and cm thickness
Share this product
Share this product

Do you need technical advice?

Customer service +34 936 806 000

Related products

See all products
Acrylic finishesPAVEMENTSPECIAL MORTARS

PROPAM® FLOOR ACRYL

Ver producto
Cement fillings and anchoringsFILLINGS. ANCHORING AND INJECTIONSPECIAL MORTARS

PROPAM GROUT 140

Ver producto
Cement fillings and anchoringsFILLINGS. ANCHORING AND INJECTIONSPECIAL MORTARS

PROPAM GROUT 180 HP

Ver producto
PAVEMENTScreedsSPECIAL MORTARS

PROPAM® FLOOR PRONTO

Ver producto