PROPAM® AISTERM CARGAS ELEVADAS

PROPAM® AISTERM CARGAS ELEVADAS 100/60 M6 Plug for fastening light and medium loads without thermal bridging, grading 6, insulation thickness up to 100 mm, anchoring depth 60 mm.
PROPAM® AISTERM CARGAS ELEVADAS 110/130 M12 Plug for fastening light and medium loads without thermal bridging, grading 12, insulation thickness up to 110 mm, anchoring depth 130 mm.
PROPAM® AISTERM CARGAS ELEVADAS 160/170 M12 Plug for fastening light and medium loads without thermal bridging, grading 16, insulation thickness up to 170 mm, depth

PROPAM® AISTERM CARGAS ELEVADAS

Description

Additional information

Documents
Fields of application

  • PROPAM® AISTERM HIGH LOADS 100/60 M6

  • For the heat-insulated fastening of:

  • -Signals

  • -Lighting

  • -Mailboxes

  • - Motion detectors

  • - Downspouts

  • -Lightning rod

  • - Blind guide rails

  • Construction materials:

  • -Concrete

  • - Vertically perforated brick

  • - Hollow blocks of lightweight concrete

  • - Perforated sandstone brick

  • - Solid sandstone brick

  • - Solid brick

  • - Aerated concrete

  • -Wood

  • PROPAM® AISTERM HIGH LOADS 110/130 M12

  • PROPAM® AISTERM HIGH LOADS 160/170 M16

  • For the heat-insulated fastening of:

  • -Canopies

  • -Awnings

  • - French balcony railings

  • - Air conditioning unit

  • - Satellite dishes

  • Approved for:

  • - Cracked and compressed concrete

  • - Vertically perforated brick

  • - Hollow blocks of lightweight concrete

  • - Perforated sandstone brick

  • - Solid sandstone brick

  • - Solid brick

  • - Aerated concrete
propiedades

  • PROPAM® AISTERM HIGH LOADS 100/60 M6

  • Remote installation allows the component to be adjusted for exact placement, thus avoiding pressure zones or damage to the overall thermal insulation system.

  • The plastic cone breaks the thermal bridge between the component and the internal fixing, offering an energy-optimized fixation.

  • The cone made of glass-fibre reinforced plastic continuously mills the integral thermal insulation system and enables simple and quick assembly without special tools.

  • Suitable for all building materials.

  • PROPAM® AISTERM HIGH LOADS 110/130 M12

  • PROPAM® AISTERM HIGH LOADS 160/170 M16

  • The PROPAM® AISTERM LOADS 160/170 M16 and PROPAM® AISTERM LOADS 110/130 M12 remote installation is a solution for fixing on exterior walls without thermal bridges in integral thermal insulation systems.

  • The system consists of a special threaded rod made of electro-galvanized steel with a fiberglass-reinforced cone, threaded studs and anchor sleeves for fixing in perforated stone.

  • In combination with PROPAM NF EPO, PROPAM NF VINYL and PROPAM NF POLI the system is suitable for numerous building materials.

  • The threaded rod, with the cone reinforced with self-piercing fiberglass, passes through the coating into the insulating material.

  • The threaded rod is anchored to the support by an anchor sleeve and injection mortar.

  • The cone in the threaded rod head breaks the thermal bridge and houses the stainless steel threaded stud for external fixing.

  • It fixes heavy loads such as awnings, air conditioning systems and satellite dishes in concrete, aerated concrete and perforated brick masonry and solid brick.

  • Direct mounting on a wooden base is also possible, without the dowel after pre-drilling.
Share this product
Share this product

Do you need technical advice?

Customer service +34 936 806 000

Related products

See all products
FAÇADESInsulating panelsTHERMAL INSULATION

PROPAM® AISTERM PANEL LANA MINERAL

Ver producto
Acrylic mortarsFAÇADESTHERMAL INSULATION

REVAT® PLAS UF

Ver producto
FAÇADESInsulating panelsTHERMAL INSULATION

PROPAM® AISTERM PLACA EPS

Ver producto
Acrylic mortarsFAÇADESTHERMAL INSULATION

REVAT® PLAS

Ver producto