PAM® ECOGEL FLEX - Hormigón y áridos

Description

Additional information

Documents

Flexible, deformable and low dust emissions cementitious adhesive in gel consistency, with fi-bres and with a high resin content and a prolonged open time, which is slip-resistant and applicable in fluid or in thixotropic consistency, for fixing all kinds of floor tiles, even large size, absorbent and non-absorbent, on indoor and outdoor walls and floors

Fields of application	For fixing ceramic tiles, stoneware, marble, with or without absorption capacity, indoors and outdoors, even large size, on cement mortar supports, concrete or plas- terboard plates Façade render Pavements with intense transit. Application by superimposing over old renders and ceramic pavements For fixing pavements on underfloor heating facilities or cooling systems Fixing of floor tiles in damp areas and swimming pools.
propiedades	Gel consistency, very creamy and lightweight Low dust emissions. With fibres. Double consistency: fluid or thixotropic Deformable and flexible Applicable up to 15 mm. Specially for façades and swimming pools Suitable for fixing ceramic tiles on old ceramic. Fixing on pavements with intense transit or with underfloor heating. Fixing in fluid consistency on indoor, tiled floors up to 100 x 100 cm. High adherence strength with any floor tile type or size, even very low absorption or large tiles Excellent workability Thanks to its deformability it can withstand heat shocks and small differential move- ments caused by the support. Slip-resistant, which means it can be applied comfortably in a vertical arrangement, but can also be mixed in fluid consistency for application on large-size pavements and parts Prolonged open time. It contains fibres which contribute to its excellent deformability
consumo	The approximate amount of PA M® ECOGEL FLEX used depends on the floating technique: Floating method: approx. 3 Kg/m2. Floating and buttering: approx 5 Kg/m2 These amounts to be used are approximate and may vary according to the state of the support, the type of part and the trowel used