PROPAM® AISTERM CARGAS ELEVADAS

PROPAM® AISTERM CARGAS ELEVADAS 100/60 M6 Plug for fastening light and medium loads without thermal bridging, grading 6, insulation thickness up to 100 mm, anchoring depth 60 mm.
PROPAM® AISTERM CARGAS ELEVADAS 110/130 M12 Plug for fastening light and medium loads without thermal bridging, grading 12, insulation thickness up to 110 mm, anchoring depth 130 mm.
PROPAM® AISTERM CARGAS ELEVADAS 160/170 M12 Plug for fastening light and medium loads without thermal bridging, grading 16, insulation thickness up to 170 mm, depth

Fields of application	PROPAM® AISTERM HIGH LOADS 100/60 M6 For the heat-insulated fastening of: -Signals -Lighting -Mailboxes - Motion detectors - Downspouts -Lightning rod - Blind guide rails Construction materials: -Concrete - Vertically perforated brick - Hollow blocks of lightweight concrete - Perforated sandstone brick - Solid sandstone brick - Solid brick - Aerated concrete -Wood PROPAM® AISTERM HIGH LOADS 110/130 M12 PROPAM® AISTERM HIGH LOADS 160/170 M16 For the heat-insulated fastening of: -Canopies -Awnings - French balcony railings - Air conditioning unit - Satellite dishes Approved for: - Cracked and compressed concrete - Vertically perforated brick - Hollow blocks of lightweight concrete - Perforated sandstone brick - Solid sandstone brick - Solid brick - Aerated concrete
propiedades	PROPAM® AISTERM HIGH LOADS 100/60 M6 Remote installation allows the component to be adjusted for exact placement, thus avoiding pressure zones or damage to the overall thermal insulation system. The plastic cone breaks the thermal bridge between the component and the internal fixing, offering an energy-optimized fixation. The cone made of glass-fibre reinforced plastic continuously mills the integral thermal insulation system and enables simple and quick assembly without special tools. Suitable for all building materials. PROPAM® AISTERM HIGH LOADS 110/130 M12 PROPAM® AISTERM HIGH LOADS 160/170 M16 The PROPAM® AISTERM LOADS 160/170 M16 and PROPAM® AISTERM LOADS 110/130 M12 remote installation is a solution for fixing on exterior walls without thermal bridges in integral thermal insulation systems. The system consists of a special threaded rod made of electro-galvanized steel with a fiberglass-reinforced cone, threaded studs and anchor sleeves for fixing in perforated stone. In combination with PROPAM NF EPO, PROPAM NF VINYL and PROPAM NF POLI the system is suitable for numerous building materials. The threaded rod, with the cone reinforced with self-piercing fiberglass, passes through the coating into the insulating material. The threaded rod is anchored to the support by an anchor sleeve and injection mortar. The cone in the threaded rod head breaks the thermal bridge and houses the stainless steel threaded stud for external fixing. It fixes heavy loads such as awnings, air conditioning systems and satellite dishes in concrete, aerated concrete and perforated brick masonry and solid brick. Direct mounting on a wooden base is also possible, without the dowel after pre-drilling.